Picture Framing Hardware (DIY)
Mat Board Straight Cutter
No Overcuts
Mat Master 66cm Ruler
Non-Slip and Accurate
Mitre Saw
Great for the home framer, hobbiest. Small teeth giving you a nice clean cut. Set to any angle needed.
PushMaster V-Nailing Tool
PushMaster will insert all sizes of V-Nails into most types of timber mouldings. Used in combination with a clamp tool to hold the joint firmly whilst nailing, any angle can be joined. Also Inserts Flexipoints and Screw Eyes. Kit comes complete with PushMaster, 400 V-Nails, Backing Nails, Flexipoints & Screw Eyes.
V-Nails
Available in 7mm and 10mm Sizes400 per pack
Backing Tape
36mm Width x 50M
48mm Width x 50M
Ezy-Framer
The Ezy-Framer is a budget priced mini V-Nailer, suitable for all sizes of V-Nails and Backing Nails. Comes complete with 130 x 7mm V-Nails.
Hanging Wire
Stainless Steel Picture Hanging Wire Super Soft Strand Plastic Coated.
9.1 kg Max. Hanging Weight (335 Metres per Spool)
11.3 kg Max. Hanging Weight (255 Metres per Spool)
19.5 kg Max. Hanging Weight (150 Metres per Spool)
9.1 kg Max. Hanging Weight (335 Metres per Spool)
11.3 kg Max. Hanging Weight (255 Metres per Spool)
19.5 kg Max. Hanging Weight (150 Metres per Spool)
Frame Clamp
Multi-Angle Adjustable Corner Clamp4M Nylon Band with 4 Corners
Mat Board Bevel Cutter
No Overcuts or Head Creep
How to Install Security Bracket and Mounting Frame to Wall
Attach 2 Security Brackets to top corners of frame back. Photograph shows the right hand bracket and the left hand bracket would be reversed so the wall mounting screw hole is facing towards the right hand bracket.
Measure the distance between the wall mounting screw hole (the circle hole in the middle). Drill screws into wall with distance measured (ensure screws are level). Leave enough of the screw head protuding from wall to mount frame.
Mount frame onto wall by inserting screw head into circle hole and push frame to the left or right to move screw head out of circle hole.
